McLaren P1 Design Study

McLaren P1

It took a while, a long while, but the spiritual successor to the game-changing and legendary McLaren F1 was finally revealed at the 2012 Paris Motor Show in the form of the McLaren P1 prototype. The McLaren P1 was developed using the knowledge learned by McLaren’s Racing division.

The styling of the  McLaren P1 is more attractive and less clinical than the MP4-12C, but you can bet your entire worldly possessions on the fact every last millimetre of the bodywork has been extensivley analysed in the windtunnel. The front is unique and original, the way lower part of the bumper flows back into the ‘C’ shaped headlights is inspired. And the P1’s rear end has got to be one of  the best in the business. Stunning.

McLaren Automotive Executive Chairman Ron Dennis said of the car: “the McLaren P1 will be the result of 50 years of racing and road car heritage. Twenty years ago we raised the supercar performance bar with the McLaren F1 and our goal with the McLaren P1 is to redefine it once again.”

“Our aim is not necessarily to be the fastest in absolute top speed but to be the quickest and most rewarding series production road car on a circuit,” adds McLaren Automotive Managing Director Antony Sheriff. “It is the true test of a supercar’s all round ability and a much more important technical statement. Our goal is to make the McLaren P1 the most exciting, most capable, most technologically advanced and most dynamically accomplished supercar ever made.”


So what do you think. Is the McLaren P1 a worthy successor to the F1?

View Results

Loading ... Loading ...

McLaren P1 interior design Press Release:

The McLaren P1 has a clear goal: to be the best driver’s car in the world on road and track. In order to achieve this, performance and handling are key, but to extract the best from the aerodynamic bodyshape and the groundbreaking technology beneath the carbon fibre exterior, the driver has to feel comfortable and in control.   For this reason, the cabin of the McLaren P1 is fully focused on the driver, and is clear from clutter and distraction as these first images show.

The interior of the McLaren P1 offers the driver and passenger a cocooning, efficiently packaged, comfortable cabin. The interior feels like the cockpit of a fighter jet, complete with glass canopy overhead and, with a windscreen deeper than it is wide, visibility is optimised.  This makes the car all the easier to plant on road and track.

Light weight – as with the rest of the car – is a priority, and switchgear is kept to a minimum, yet the McLaren P1 retains luxury features such as full climate control, satellite navigation and a bespoke sound system, developed from the outset with Meridian.

McLaren P1 interior

McLaren is a pioneer in the use of carbon fibre, and it features extensively throughout the McLaren P1, not least in the MonoCage chassis and the aerodynamically-shaped body panels, but also inside the two-seat cabin. It is the lightest possible material, while offering the strength desirable for safety and structural integrity, and is used for the dashboard, floor, headlining, doors, rockers and a single piece is shaped for the central control unit to further optimise weight. Attention to detail within the interior of the McLaren P1 is such that, to further reduce weight, the top layer of resin has been removed, to leave the carbon non-lacquered for a more natural look…and saves a further 1.5kg.

The amount of trim covering within the cabin has been minimised, leaving as many parts as exposed as possible, and there is no interior sound deadening in order to optimise weight saving even further. Carpet is offered, as an option, but when chosen, it is fitted with a special lightweight backing.

The racing bucket seats use the minimum amount of foam, are encased in ultra-thin carbon fibre shells, and mounted on lightweight brackets and runners, contributing to an overall weight of just 10.5kg each. The seat backs are fixed to 28 degrees from the vertical, but can be set to 32 degrees to make them more suitable for racing as it will give more helmet head room. The height of the seat will be custom set to suit the driver and passenger, and can be subsequently adjusted in the workshop. Fixings for a six-point race harnesses are in place, in addition to inertia reel seat belts.

The steering wheel diameter is as technically precise as a McLaren racing driver’s wheel. This is because past McLaren world champions’ grips were modelled on a CAD system and scanned to produce an exact replica. The rim is finished in Alcantara, with carbon fibre inserts.

Source: McLaren Automotive


  1. I Love it! After just analyzing this car I feel like its a piece of art. Although it does seems rather alien like, which is the thing I love about it. I think it is it appearance which truly sets it apart, because it does look like a car on its own. There really is no imitation here.

  2. I think the exterior is stunning. I do hope that they would spruce up the interior however. I’ve always thought that at this price range the center
    seating position was the way to go. Conventional seating will always be a compromise on the driving dynamics.

Leave a Reply